Disables CPU monitoring on the switch.
This command has no arguments or variables.
CPU monitoring is enabled and occurs every 5 seconds.
Use this command to disable CPU monitoring on the switch.
This command does not clear the monitoring interval. Therefore, if you altered the CPU monitoring interval, this command does not return the CPU monitoring interval to 5 seconds. To return to the default frequency level, use the enable cpu-monitoring {interval seconds} {thresholdpercent} and specify 5 for the interval.
The following command disables CPU monitoring on the switch:
disable cpu-monitoring
This command was first available in an ExtremeXOS 11.2.
The default value shown began in ExtremeXOS 12.1.
This command is available on all Universal switches supported in this document.